Amplificador Marinizado 6 Canais JL Audio M600/6 24V

M600/6-24V

For 24V systems only: 6-Channel Class D Marine Full-Range Amplifier, 100 W x 6 @ 2 O / 75 W x 6 @ 4 O - 28.8V

This incredibly flexible amplifier packs a serious full-range punch, and delivers a staggering 100 watts to each of its six channels into 2 O (28.8V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexDTM ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.

With the M600/6-24V, you have lots of great options. Use it as a six-channel satellite amplifier with 75 W x 4 @ 4 O, or bridge four of its channels to create a staggered power four-channel amplifier with 200W x 2 @ 4 O to one pair of satellites and 75 W x 2 @ 4 O to a secondary pair of satellites. You can also drive two subwoofers with 200 W each, plus a pair of satellites with 75W x 2. The M600/6-24V includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an HD-RLC remote level control (sold separately), you have the ability to control the level of two, four or all six of the amplifier's channel levels from a remote location.

This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.

This amplifier is designed for operation in vessels with 24 volt, negative-ground electrical systems. Use of this product in vessels with positive ground and/or voltages other than 24 V may result in damage to the product and will void the warranty.

Rated Continuous (RMS) Power @ 28.8 V

@ 4 O 75 W RMS x 6

@ 2 O 100 W RMS x 6

Bridged @ 4O 200 W RMS x 3

Rated Continuous (RMS) Power @ 25 V

@ 4 O 60 W RMS x 6

@ 2 O 90 W RMS x 6

Bridged @ 4O 180 W RMS x 3

General Specifications

Frequency Response 12 Hz - 22 kHz (+0, -1dB)

S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)

S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)

Damping Factor @ 4 O >150 / 50 Hz

Damping Factor @ 2 O >75 / 50 Hz

THD+N @ Rated Power <1% @ 2 O per Ch.

Input Voltage Range @ RCA Inputs 100 mV - 4 V RMS

Min.Copper Power / Ground Wire Gauge 4 AWG wire

Fuse Rating 30 A (AFS, AGU or MaxiFuseTM)

Signal Processing

Filter Mode(s) Low-Pass or High-Pass

Filter Slope(s) 12 dB/octave

Filter Frequency Range 50 Hz - 500 Hz

Detented, Calibrated Filter Freq. Potentiometers Yes

Filter Defeat Function Yes

Remote Level Control Optional (HD-RLC)

Remote Level Modes 2 or 4 or All Channels

Channel Input Mode Switch Yes (2/4/6 ch.)

Pass-Through Preamp Output None

Source Channel Selection for PreOuts N/A

Physical Specifications

Height (H) 2.05 in / 52 mm

Width (W) 10.23 in / 260 mm

Depth (D) 7.09 in / 180 mm

Net Weight 5.8 lb / 2.63 kg